← E-PIAN User guide
Acousticsamples

User guide

E-PIAN

The E-Pian is a Classic 73-Keys Electric Piano from 1972, recorded with the direct output plugged into a tube preamp.

acousticsamples.net/e-pian October 2026
01

Overview

STRAIGHT FROM THE STAGE

The E-Pian is a classic 73-key electric piano from 1972, recorded with its direct output plugged into a tube preamp. Its tines were adjusted to give very few overtones, which makes it especially warm.

It was in "normal" condition, not properly restored, with a few keys not sounding quite right - so we sampled it both before and after fixing them. This might be the electric piano you find on stage, five minutes before your concert. Around 3465 samples, with 13 velocity layers for the sustain and up to 26 velocities for the releases.

02

Interface

Default interface
Default interface
Settings
Settings
03

Features

Original or cleaned

Original or cleaned

The few imperfect keys of the original instrument were sampled as they were, and again once fixed: one switch chooses between the original and the cleaned version.

Click Settings for the rest of the controls: the release and pedal noise volumes - the pedal noise adds a lot to the realism - and the sensitivity, which sets how quiet the softest notes are.

More about this

Tweaks

Original / Cleaned: plays the original keys, imperfections included, or the fixed ones

Release Volume: the sound produced when you release a key while a note is playing

Pedal Volume: the sound of the sustain pedal being pressed or released, triggered automatically

Sensitivity: sets the minimum volume for velocity 1, from a narrow to the full dynamic range

EQ, amp, tremolo and spring reverb

The Bass and Treble EQ reproduces the two knobs of the real instrument, and an amp simulation based on a Fender 212 cabinet can be switched on or off.

The stereo tremolo is part of the sound of electric pianos, so its amount and speed are here too, along with a spring reverb made from an impulse response of the kind of reverb most used on this instrument.

More about this

Effects

Eq: Bass and Treble of a parametric EQ, the two knobs available on the real instrument

Reverb: a spring reverb built from an impulse response

Cabinet: turns the amp simulation, based on a Fender 212 cabinet, on or off

Tremolo: the stereo pan tremolo, with On/Off, Speed and Amount

04

Technical specifications

2.58Gb uncompressed, 389Mb compressed in lossless flac format, around 3465 samples.
13 Velocity layers for the sustain.
up to 26 Velocities for the release.
Sustain pedal noises (up and down), triggered automatically.
EQ.
Tremolo simulation.
Amp simulation.
Spring Reverb.
Advanced UVI scripting giving you access to a simple yet powerfull interface and advanced features.

Sample player

VSTVST3AUAAXStandalone

E-PIAN plays in UVI Player (formerly UVI Workstation), UVI's free sample player. We provide it with every library you buy, so you don't need an expensive sampler to use our products. It works on Mac (macOS 10.14 or later, Intel or Apple silicon) and Windows (10 or later), standalone or as a plug-in (VST / VST3 / AU / AAX), in 64-bit only. More about it here.

Copy protection

We use the iLok system to protect our products and you can choose to register your license to your computer or to an iLok dongle. If you decide to use an iLok dongle, both V1 and V2 are compatible with our products. You can activate your license on up to 3 computers or iLok dongles at the same time and you can deactivate one and activate another as many times as you want.

Registration

Once your order is complete, you will be provided with a serial number. You will then be able to register it to your iLok account from our website on this page (you need to be logged in to access this page). The whole process is described in the FAQ (instructions + screencast).